Ceramic Pro Installer

Ceramic Pro is a multi-layerable, clear, liquid nano-ceramic coating. When cured, this technology will transform itself on the surface to a permanent, ridged, flexible glass shield. Ceramic Pro can be described as an additional clear coat, with 3 times the hardness and self cleaning properties. Ceramic Pro products have been tested by SGS, the world’s leading inspection, verification and certification entity.

Why ceramic pro on my vehicle?

Good Investment

The coating will protect the vehicles exterior and interior from deteriorating for a lifetime. The resale market value will therefore be substantially higher!

Looking new all the time

Once the coating is applied you will see a mirror effect, glossiness and color depth, incomparable to anything else! With proper maintenance your car’s finish will shine for many years to come.

Less maintenance

The slickness of the coated surface doesn’t allow dirt, break dust and tar to stick to your car’s paint, wheels or glass. This makes washing your vehicle less labor intensive and less frequent. Waxing is now obsolete.

Ceramic Pro Certificates

Ceramic Pro once cured, is measured to have hardness above 9H. Normal clear coat has hardness between 2H and 4H. The glass shield prevents minor scratches to your clearcoat and acts as a sacrificial layer. This preserves the original factory paint.

Any surface scratches that happen in the coating are easily removed with light polishing which will not weaken the integrity of the original clear coat. With Ceramic Pro your paint won’t fade or age due to the UV protection in the glass coating.

Glossy, slick and self-cleaning This nano technology allows the Ceramic nanoparticles to fill the smallest pores in the paint which makes the Ceramic Pro glass shield shiny, smooth and extremely slick or hydrophobic. Ceramic Pro dramatically lowers the surface tension preventing environmental contaminants such as: bird droppings, bugs, dirt, tar and graffiti paint from bonding to the surface. Water easily removes dirt from the surface by encapsulating it while rolling off the surface. This is called the self-cleaning effect.

Permanent protection Ceramic Pro 9H is a one-time application if maintained correctly. Once the Ceramic Pro glass shield has cured it can only be removed through abrasion like wet sanding. This puts Ceramic Pro in a category by itself, compared to sealants or waxes that degrade quickly.

Ceramic Pro Packages

Ceramic Pro Gold Starting @ $1565.00

  • Perform Beta Enhancement detail.
  • Wipe down vehicle w/ wax and grease remover to remove any wax, grease, or residue left from polishing the paint.
  • Apply 4 layers of 9h to exterior paint allowing approximately 1 hour to cure time in between layers.
  • Apply 1 extra layer of 9h to all heavily exposed areas.
  • Apply 1 layer of CP Light to all exterior paint as a top coat.
  • Apply 1 layer of 9h to all plastics & chrome.
  • Apply 1 layer of 9h to all exterior wheel faces.
  • Apply 1 layer of CP Rain to all exterior glass & mirrors.
  • Allow Ceramic Pro to cure up to 48 hours

With paint enhancement we normally need vehicle for a minimum of 5 days. With paint correction we normally need vehicle for at least 6-8 days and strongly encourage our Beta (included) or upgrade to a Gamma level detail for the ultimate shine.

Go For Gold!